Results 1 to 1 of 1

Thread: pid controller

  1. #1
    Join Date
    Mar 2011
    Location
    Edmonton Alberta Canada
    Posts
    9

    Default pid controller

    we have used the Auber pid controller with our 1400 for a couple of years works great with very little variance in temperature swing
    wanted to do some jerky and mention to my wife i would like to get the jerk dryer as we had done some leaving the door open to dry it which is a pain
    she got it for me as an early fathers day gift, over the weekend programmed it into the controller

    so the controller brought the temp up to 160 for 3 hours then dropped it to 130 for 4 hours with the jerk dryer being turned on at 4 hours
    so it ran for 3 total of 7 hours and the pid shuts down everything, worked perfectly have to cut back about an hour on the dry time
    Attached Thumbnails Attached Thumbnails IMG_3013.jpg   IMG_3014.jpg   IMG_3012.jpg  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •