Results 1 to 10 of 13

Thread: Getting 2 racks of ribs done at the same time?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Getting 2 racks of ribs done at the same time?

    When I smoke ribs, I usually do two racks. Started with spare ribs, now going with St Louis style. Both have to be layed corner to corner on the rack to fit, on two different racks. It takes any where from 30 minutes to 1 1/2 hours for the top rack to get done after the bottom. Any tips on getting them done about the same time? Sizes are usually within 2-3 oz of each other. Any more than that, the larger definitely goes on the bottom.

  2. #2
    Join Date
    Mar 2011
    Location
    Cedar, MN (but still not far enough from the Cities)
    Posts
    657

    Default

    I always cut my racks of baby backs in half for my 1400. I can arrange them in brick fashion on the racks (one vertical, two horizontal) on one rack, them two horizontal and one vertical on the next rack. I think it makes the heat and smoke flow around then, rather than straight through, but I also put everything in, set the temp at 225 and close the door, and leave it closed for 6 hours. Everything seems to be done pretty similarly at the end of the time, but, YMMV, since I'm not doing St Louis style.
    I believe in catch and release fishing. I don't want to EAT 'em all, I just want to GREET 'em all!

  3. #3

    Default

    Quote Originally Posted by bigwalleye View Post
    I always cut my racks of baby backs in half for my 1400. I can arrange them in brick fashion on the racks (one vertical, two horizontal) on one rack, them two horizontal and one vertical on the next rack. I think it makes the heat and smoke flow around then, rather than straight through, but I also put everything in, set the temp at 225 and close the door, and leave it closed for 6 hours. Everything seems to be done pretty similarly at the end of the time, but, YMMV, since I'm not doing St Louis style.
    When I put mine in, I set it also at 225 and first start checking at 6 hrs. I had been thinking about cutting each rack in half also. To be clear, when you say brick style, you're laying the ribs on the grate like this l - l, and the next layer 90 degrees to that? You're not laying some flat and the other on end/side.

  4. #4
    Join Date
    Mar 2011
    Location
    Cedar, MN (but still not far enough from the Cities)
    Posts
    657

    Default

    Re: the brick style, yes. Two half racks I - I in the back of the rack, one _ in the front. Then on the next rack, two I -I in the front, and one _ in the back. May be a small thing, but seems like the heat distribution is more even.

    Maybe, maybe not, but I never get any complaints!
    I believe in catch and release fishing. I don't want to EAT 'em all, I just want to GREET 'em all!

  5. #5

    Default

    Just tried again yesterday. Cut 2 racks in half, St Louis style. Did one rack with 1/2 on left. Other half on right. Next rack with 1/2 in back and other half in front. Also dropped the racks to the 2nd and 3rd spaces from the top. They came out about 15 minutes apart! Thanks for your help!

  6. #6
    Join Date
    Mar 2011
    Location
    Cedar, MN (but still not far enough from the Cities)
    Posts
    657

    Default

    Nothing like the taste of success!!!!

    Glad I could be of help!
    I believe in catch and release fishing. I don't want to EAT 'em all, I just want to GREET 'em all!

  7. #7
    Join Date
    Jul 2018
    Location
    Austin Texas
    Posts
    3

    Default Re: Getting 2 rack of ribs done at the same time

    Quote Originally Posted by TexanTrail View Post
    When I smoke ribs, I usually do two racks. Started with spare ribs, now going with St Louis style. Both have to be layed corner to corner on the rack to fit, on two different racks. It takes any where from 30 minutes to 1 1/2 hours for the top rack to get done after the bottom. Any tips on getting them done about the same time? Sizes are usually within 2-3 oz of each other. Any more than that, the larger definitely goes on the bottom.
    I am able to get 4 full racks in the Model 1400 using the SmokinTex Rib Hook Set. They are all ready at the same time. The smoker is hotter at the bottom so I hang the racks with the thick end down.

    https://id34137.securedata.net/smoki...?products_id=9

    Click image for larger version. 

Name:	Smoked Ribs.jpg 
Views:	12 
Size:	96.5 KB 
ID:	672

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •